SERIES REFERENCE

JK-PB Series: Protocol-Led Selection

PB selection runs backwards from the inverter. Get the protocol right and the electrical sizing is the easy half.

Identify the inverter first

Record the inverter brand, model and firmware version before choosing a BMS. Protocol support is negotiated between a specific BMS firmware and a specific inverter build, and a brand name alone does not establish it.

Then the physical layer

A supported protocol still fails on the wrong cable. Confirm whether the link is CAN or RS485, what the pinout is at both ends, and whether the connector is wired straight through or crossed.

  • CAN or RS485 — they are not interchangeable
  • Pinout at the BMS and at the inverter, checked against both manuals
  • Termination requirements on the bus
  • Whether the display occupies the port the inverter needs

Commissioning order

Bring the pack up on local monitoring first and confirm cell readings before connecting the inverter link. Debugging a protocol handshake against a pack that has an unrelated balance or wiring fault wastes most of a commissioning day.

Official next steps

OFFICIAL PAGE

RS485 and CAN wiring

Port identification, pinout and verification.

OFFICIAL PAGE

JK-PB models

Stocked PB codes and ratings.

OFFICIAL PAGE

Communication cables

Cables matched to inverter links.

Frequently asked questions

Does a supported inverter brand guarantee it will work?

No. Support is specific to BMS firmware and inverter build, so both versions must be confirmed.

Can the display and the inverter share a port?

On some models the display occupies the port the inverter needs. Check the port map for the exact code.

What should be commissioned first?

Local monitoring and cell readings, before the inverter link is connected.

REFERENCE

Short answers, written for the bench

One question each, answered from the integration side: what a code means, how a family is sized, which cable a link needs, and what to confirm before ordering.
MODEL IDENTIFICATION

Identify a JKBMS

Read a JKBMS model code, confirm what the board on the bench actually is, and match it to the right product page before ordering a replacement.

Read itNAMING

JK BMS naming

Sort out the JK BMS, JK-BMS, JKBMS and JIKONG spellings, and learn which parts of a listing actually identify the hardware.

Read itNAMING

JIKONG BMS

Why JIKONG and JKBMS appear on the same hardware, and how to read a board label when the two names are mixed.

Read itSERIES REFERENCE

JK-BD series

Match a JK-BD model to a real battery pack by string count, continuous current, balance current and the port set the installation needs.

Read itSERIES REFERENCE

JK-PB series

Select a JK-PB model by the inverter it has to talk to, then confirm the cable, pinout and protocol before the pack is built.

Read itSERIES REFERENCE

JK-B2A series

Decide whether a pack needs 2A active balancing, and what the JK-B2A family costs in heat and space to deliver it.

Read itCABLES

Inverter cables

Pick a JKBMS communication cable by protocol and pinout rather than by connector shape, and avoid the swaps that damage a port.

Read itSELECTION

Active balancing

Work out the active balance current a pack needs from cell matching, capacity and duty cycle, instead of buying the highest number available.

Read itSELECTION

LiFePO4 BMS

Translate a LiFePO4 pack design into BMS requirements: series count, current, temperature sensing, and the charge behaviour the chemistry needs.

Read itINTEGRATION

Inverter integration

A practical order of operations for BMS to inverter communication, from confirming protocol support to isolating a failed handshake.

Read itCOMMUNICATION INTENT

CAN vs RS485

Decide whether a BMS link should be CAN or RS485, and confirm the pinout, bitrate and protocol before ordering a cable.

Read it

ENGINEERING NOTES

Settle the decision, then pick the part

Each note works through one decision end to end. Where a note and a product page disagree, the product page and the written quotation are the ones that bind.
SOURCE CHECKS

Check a JKBMS source

Check a JKBMS listing against what a reseller cannot restate: the four segments of the model code, the version the board reports itself, the visible port set, and a quotation that names its own exclusions.

Read guideNAME TO PART

From brand name to part

All four spellings return the same hardware, so none of them narrows anything. This maps the term you searched to the artefact you were actually after: a model code, a manual, a firmware note or a cable.

Read guideORDERING

How ordering works

Two order paths run on this catalog. Work out which one a product uses, what shipping costs to your destination, which currency you will be charged in, and what has to be fixed before payment.

Read guideENCLOSURE DOCS

Battery box documents

Find the JKESS enclosure document that matches the format you were shipped, and work out the four cell measurements an enclosure manual assumes you already checked.

Read guidePEAK SHAVING

Sizing peak shaving

Work peak shaving out of interval data: find the billing demand window, measure the energy above the threshold, size kW and kWh separately, and stop the recharge from setting the next peak.

Read guideTHERMAL

Air or liquid cooling

Estimate what a battery cabinet actually has to reject, judge the design on cell-to-cell temperature spread rather than average temperature, and price in what each cooling system costs to keep working.

Read guideBMS ARCHITECTURE

What a BMU is

BMU means different things in different datasheets. Establish what a specific controller does from its I/O list, count units from channels rather than from kWh, and find where the interlock loop really terminates.

Read guideSOURCING

Comparing ESS quotes

Normalise C&I ESS quotations before comparing price: usable against nameplate energy, what the warranty actually measures, the line items that fall outside the scope, and who owns the integration boundary.

Read guideAPP AND BLUETOOTH

JKBMS app and Bluetooth

Connect the JKBMS app over Bluetooth, understand pairing behaviour and permissions, and work through the connection failures reported most often.

Read guideRS485 AND CAN WIRING

JK BMS RS485 and CAN wiring

Identify the RS485 and CAN ports on a JK BMS, verify the pinout against the manual for your model, and avoid the wiring mistakes that damage a port.

Read guideFIRMWARE AND PARAMETERS

JKBMS firmware and parameters

Understand how JKBMS firmware versions affect available parameters, what to record before changing settings, and how to avoid an unrecoverable configuration.

Read guideFAMILY TABLE

BD, PB, B1A and B2A side by side

One table showing what each family is built around, so a shortlist takes a minute instead of a browse.

Read guideENCLOSURE FIT

Fitting cells into an enclosure kit

Measure the cells before shortlisting a box: stack length with compression, height over the terminals, mass and rack loading.

Read guideBOARD SELECTION

Narrowing the catalog to one code

Work from the pack and the inverter rating down to a handful of codes instead of browsing the list.

Read guideBD OR PB

Which family the project needs

Local monitoring or an inverter protocol link. That question decides the family before anything else does.

Read guideBALANCE CURRENT

How much balancing a pack needs

Balance current is a rate. Match it to how fast the pack drifts and how much idle time it has to recover.

Read guideBUS CHOICE

CAN or RS485 for the link

The device at the far end decides the bus. Confirm pinout, bitrate and protocol profile before buying a cable.

Read guideHIGH-VOLTAGE

Where contactor authority sits

Split responsibilities between module slaves and the cluster master, and find what nothing in the design owns yet.

Read guidePROJECT INPUTS

What to fix before requesting a cabinet quote

The decisions that have to be settled first, and the ones that can safely stay open until the design review.

Read guide