JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board official JKBMS main product image

1 / 5

JKBMS Accessories

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board

Accessory for JKBMS monitoring, display, communication, or parallel operation

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is a JKBMS accessory listed from $9.98. Use it to complete monitoring, display, interface, or parallel-module requirements after confirming compatibility with the installed BMS model.

Model: P-LINK-CR
Series: JKBMS Accessories
Selection note: Confirm compatibility with the target JKBMS model, connector, cell count, and system voltage before ordering.

Choose configuration

Selected configuration$9.98

Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.

Product details

Supply scope and specifications

Key features

JKBMS-compatible accessory
Supports monitoring, display, communication, or parallel operation depending on model
Selected by target BMS model and connector type
Useful for service, installation, or system expansion

Included

Selected JKBMS accessory model
Standard connector or accessory parts supplied with that model
Basic product packing from the supplier

Not included

BMS main unit, inverter, battery cells, and external system hardware
Installation, firmware update, parameter setup, or compatibility debugging service
Any adapter, cable, or accessory not named in the selected product option

ModelP-LINK-CR

SeriesJKBMS Accessories

Selection noteConfirm compatibility with the target JKBMS model, connector, cell count, and system voltage before ordering.

Reference sourceImported from public JKBMS shop listing on 2026-07-02

SELECTION HELP

Check the system requirements before ordering

Technical guides help narrow the product and configuration. The exact product specifications, written quotation, and compatibility confirmation remain the final reference.

SELECTION GUIDE

How to choose a JKBMS

Check strings, current, active balancing, display, and communication requirements before comparing models.

Read guide COMMUNICATION GUIDE

CAN vs RS485 for a BMS

Separate physical interface choice from inverter protocol and system compatibility requirements.

Read guide

MODEL-SPECIFIC APPLICATION NOTES

P-LINK-CR selection context

P-LINK-CR should be compared as a specific JKBMS accessories product, not only by a copied title or image. The selection should be based on the real battery system, installation space, communication needs, and official quotation or checkout configuration.

Application context

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board belongs to the JKBMS accessories and is best reviewed for monitoring, display, module, or harness requirements around an existing JKBMS installation.

Use the exact product page to confirm the selected configuration, accessories, and quotation scope for P-LINK-CR.

For communication planning, confirm whether the final installation needs Bluetooth, LCD, CAN, RS485, USB, or a model-specific adapter.

Decision checks

Confirm battery chemistry, cell count, and pack voltage before selecting the product.
Confirm mounting position, cable exit, airflow, and service access in the final enclosure.
For direct checkout, verify the selected configuration and destination shipping before payment.
Use www.batteryboxkit.com and zhou@jkess.com to verify official source, quotation, and bulk purchasing details.

JKBMS official LiFePO4 BMS Model index

Model planning

Model fit and purchase planning

Use this summary to confirm whether JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board fits the battery system before checkout, quotation, or installation.

Model: P-LINK-CR
Primary use: JKBMS display, monitoring, module, or harness support

Pre-order checks

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board should be checked against the real battery pack, load current, installation space, thermal conditions, and selected accessories before purchase.
Confirm current rating and protection design from the final product page or written quotation before ordering.
If the product will connect to an inverter, confirm the exact communication hardware, protocol, and cable requirement before shipment.
Review balancing requirements separately when the battery pack uses large-capacity cells or has known cell mismatch.

Official website verificationVerify www.batteryboxkit.com, company identity, and official sales contact.JKBMS selection guideNarrow the catalog by strings, current, balancing, and communication.JKBMS model indexCompare model families, string ranges, current ratings, and communication.

System fit checks

Compatibility, installation, and official purchase checks

Use these checks before selecting a configuration, requesting a quote, or installing the product in a battery system.

Compatibility

Match the product to the battery system

Confirm the exact supported battery string range on the product page. Match the continuous current rating to the actual load and protection design. Confirm the required active-balancing current before choosing a model.

Communication

Confirm protocol and interface details

For any inverter-connected system, confirm CAN or RS485 requirements, cable wiring, battery limits, master-slave roles, and commissioning settings before shipment.

Installation

Plan wiring, mounting, and operating conditions

Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.

Official source

Verify the product and quote channel

Verify this product on https://www.batteryboxkit.com/shop/p-link-cr, confirm the official domain is www.batteryboxkit.com, and use zhou@jkess.com for quotation checks before bulk payment or project procurement.

Buying notes

What to confirm before ordering

Practical points buyers raise before paying: where the product comes from, what documentation to check first, how it ships, and how the price is set.

Source

Bought from the factory that builds it

This catalogue is operated by JKBMS Electronic Technology Co.,Ltd rather than a reseller, so model configuration, documentation, and warranty questions are answered by the manufacturer instead of being referred upstream.

Documentation

Confirm the manual before you wire anything

Parameter sets and connector assignments differ between model families and hardware revisions. Download the manual for this exact model and check it against your pack before commissioning rather than relying on a similar model.

Shipping

Free worldwide shipping

JKBMS boards, monitors, displays, and accessories ship free worldwide. Delivery time depends on destination and customs handling rather than on the order value.

Checkout

Priced per SKU, paid through PayPal

Each configuration is priced separately and the total is re-checked on the server at checkout, so the price shown for the selected SKU is the price charged. Larger quantities are quoted separately through a bulk enquiry.

Product FAQ

Official buying and compatibility notes

What is JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board used for?

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is listed for jkbms accessories. JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board is a JKBMS accessory listed from $9.98. Use it to complete monitoring, display, interface, or parallel-module requirements after confirming compatibility with the installed BMS model.

Who makes JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board, and who am I buying it from?

JKBMS hardware is manufactured by JKBMS Electronic Technology Co.,Ltd. BatteryBoxKit is the stocking storefront operated by that company, so this listing ships from held stock. Quotations and order confirmations come from zhou@jkess.com.

How should I confirm compatibility before ordering JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Confirm model P-LINK-CR against the battery pack, inverter, wiring, and project requirements before ordering.

What is included with JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Selected JKBMS accessory model; Standard connector or accessory parts supplied with that model; Basic product packing from the supplier. Not included: BMS main unit, inverter, battery cells, and external system hardware; Installation, firmware update, parameter setup, or compatibility debugging service. The final selected configuration and written quotation remain the reference for supply scope.

How do payment, shipping, and returns work for JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board?

Purchasable JKBMS products can be ordered from the product page. Verify the model, configuration, destination, and official sales contact before bulk purchasing or project use. Return and shipping rules are published at https://www.batteryboxkit.com/company/policies.

Get in Touch

Ready to power your future? Contact us for a custom quote or partnership inquiry.

Phone+86 131 6282 8868

WeChat

Emailzhou@jkess.com

LocationBuilding B4, Guangming, Shenzhen, China

JIKONG P-Link-CR JKBMS Serial BMS RS485 Interface Board