1 / 2JKBMS JK-BD Series
BD smart BMS with active balancing for higher-voltage lithium packs
JKBMS JK-BD4A24S12P Smart Active Balance BMS is a JK BD-series smart active-balance BMS listed from $74.06. It is suited to 8-24S lithium battery packs and should be selected by cell count, discharge current, balance current, and required communication interface.
Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.
Product details
SELECTION HELP
Check strings, current, active balancing, display, and communication requirements before comparing models.
Read guideSERIES COMPARISONCompare series roles, storage applications, display needs, and inverter communication requirements.
Read guideCOMMUNICATION GUIDESeparate physical interface choice from inverter protocol and system compatibility requirements.
Read guideFIT AND INSTALLATION NOTES
JK-BD4A24S12P gets chosen by matching two figures on a page — 8-24S and 120A — and neither one describes the pack it is going into. 8-24S is the ceiling on the string it can protect, not a target to build up to, and 120A is what the board passes, not what the cells, the harness and the terminals will pass all day. Start from the load and the cell count in front of you.
Bought for a higher-series pack where the load current and the balance rate both have to be sized. Within the JK-BD series, that is the job this one is sized for.
The numbers to design against: 8-24S series, 120A continuous, 0.4A balancing. Read them against the load and the cells, not against another model's headline figure.
Communication on this unit is Bluetooth, Display. That establishes what it can speak, not whether a given inverter will answer; the protocol profile, pinout and both firmware versions still decide that.
Family position
BD4A24S12P| Model | Strings | Continuous | Balance | From, US$ |
|---|---|---|---|---|
JK-BD4A8S6P | 8S | 60A | 0.4A | 71.26 |
JK-BD4A17S4P | 17S | 40A | 0.4A | 69.71 |
JK-BD4A20S4P | 20S | 40A | 0.4A | 70.14 |
JK-BD4A20S6P | 20S | 60A | 0.4A | 75.88 |
JK-BD4A20S8P | 20S | 80A | 0.4A | 82.59 |
JK-BD4A20S10P | 20S | 100A | 0.4A | 73.04 |
JK-BD4A20S12P | 20S | 120A | 0.4A | 73.62 |
JK-BD4A24S4P | 24S | 40A | 0.4A | 70.43 |
JK-BD4A24S6P | 24S | 60A | 0.4A | 84.11 |
JK-BD4A24S8P | 24S | 80A | 0.4A | 89.03 |
JK-BD4A24S10P | 24S | 100A | 0.4A | 73.33 |
| JK-BD4A24S12Pthis listing | 24S | 120A | 0.4A | 74.06 |
JK-BD4A24S10P is the BD4A board next to this one on current and on nothing else: 100A versus 120A, 24S and 0.4A on both. US$0.73 separates the two at the base configuration. Buyers who do not need the extra current are paying for it anyway; buyers who need it cannot recover it from settings.
JK-BD4A20S12P holds the same 120A continuous rating and changes only the string ceiling: 76.8V nominal here against 64V there. Cell count is fixed by the pack being built, so it is the constraint that comes first.
JK-BD6A24S12P is the other candidate for the same pack: 24S, 120A, 0.6A balancing rather than 0.4A. It sits US$2.90 above this listing at the base configuration. If the cells are matched and the duty cycle leaves idle time, the cheaper of the two is the right answer; if they are not, no protection setting replaces balance current.
13 BD4A codes are priced here, from US$69.31 for JK-BD4A8S4P to US$89.03 for JK-BD4A24S8P; JK-BD4A24S12P is 9 of that set at US$74.06 before configuration options. The spread across the family is a ratings spread rather than a margin spread, so quote the cheapest code that clears the calculation.
Model planning
The figures below are the ones that decide whether JKBMS JK-BD4A24S12P Smart Active Balance BMS works in a given pack. Read them against the cells and the load before ordering.
System fit checks
Four things worth settling while the order is still changeable, and one worth doing in the right order once the hardware arrives.
Confirm the battery pack is within 8-24S. Match the 120A continuous discharge rating to the inverter, load, wiring, and thermal design. Use the 0.4A active-balancing class as one selection input, not as a substitute for good cell matching.
The listed communication options are Bluetooth, Display. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Bring the pack up on local monitoring and confirm the cell readings look sane before connecting anything downstream. Debugging a protocol handshake against a pack that has an unrelated wiring or balance fault costs most of a commissioning day.
Buying notes
Practical points buyers raise before paying: where the product comes from, what documentation to check first, how it ships, and how the price is set.
This catalogue is operated by JKBMS Electronic Technology Co.,Ltd rather than a reseller, so model configuration, documentation, and warranty questions are answered by the manufacturer instead of being referred upstream.
Parameter sets and connector assignments differ between model families and hardware revisions. Download the manual for this exact model and check it against your pack before commissioning rather than relying on a similar model.
JKBMS boards, monitors, displays, and accessories ship free worldwide. Delivery time depends on destination and customs handling rather than on the order value.
Each configuration is priced separately and the total is re-checked on the server at checkout, so the price shown for the selected SKU is the price charged. Larger quantities are quoted separately through a bulk enquiry.
Product FAQ
JKBMS JK-BD4A24S12P Smart Active Balance BMS is a JK BD-series smart active-balance BMS listed from $74.06. It is suited to 8-24S lithium battery packs and should be selected by cell count, discharge current, balance current, and required communication interface.
Check continuous current (120A), balance rate (0.4A), the port set (Bluetooth, Display) against the pack you are building. The order that matters: series count has to match the cells, current has to cover the load with margin, and the port set has to leave a free port for whatever the system talks to.
Selected JKBMS smart BMS model or display bundle; Model-specific wiring harness and standard accessories supplied with the product; Documentation or setup references supplied with the selected package. Not included: Battery cells, battery enclosure, inverter, charger, and external power cabling; External contactors, breakers, fuses, and installation hardware unless specified. Where a configuration option changes the contents, the option selected at checkout is what ships.
JK-BD4A24S12P is stocked here as a jkbms jk-bd series listing. JKBMS hardware is built by JKBMS Electronic Technology Co.,Ltd, and BatteryBoxKit is the storefront that holds and ships it, so orders leave from held stock and confirmations come from zhou@jkess.com.
This listing carries a single configuration. Order directly from this page; boards, displays, cables and accessories ship free. If the cart also includes a battery kit, that kit's destination-based shipping rule applies, so confirm the destination before paying.
Shipping and return terms apply to this listing and to every configuration shown above.
Ready to power your future? Contact us for a custom quote or partnership inquiry.
WhatsApp
WeChat