1 / 4JKBMS JK-BD Series
BD smart BMS with active balancing for higher-voltage lithium packs
JKBMS JK-BD6A24S15PD Smart Active Balance BMS is a JK BD-series smart active-balance BMS listed from $76.23 to $111.21. It is suited to 8-24S lithium battery packs and should be selected by cell count, discharge current, balance current, and required communication interface.
Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.
Product details
SELECTION HELP
Check strings, current, active balancing, display, and communication requirements before comparing models.
Read guideSERIES COMPARISONCompare series roles, storage applications, display needs, and inverter communication requirements.
Read guideCOMMUNICATION GUIDESeparate physical interface choice from inverter protocol and system compatibility requirements.
Read guideFIT AND INSTALLATION NOTES
The figure buyers compare last on JK-BD6A24S15PD is the balancer at 0.6A, against a board rated 150A. That ratio is why a balancer corrects slow drift and cannot rescue a mismatched cell, and why reaching for a higher-current board to get faster balancing spends money on the wrong axis.
Bought for a higher-series pack where the load current and the balance rate both have to be sized. Within the JK-BD series, that is the job this one is sized for.
The numbers to design against: 8-24S series, 150A continuous, 0.6A balancing. Read them against the load and the cells, not against another model's headline figure.
Communication on this unit is Bluetooth, Display. That establishes what it can speak, not whether a given inverter will answer; the protocol profile, pinout and both firmware versions still decide that.
Family position
BD6A24Scurrent positionD| Model | Strings | Continuous | Balance | From, US$ |
|---|---|---|---|---|
JK-BD6A24S8P | 24S | 80A | 0.6A | 71.88 |
JK-BD6A24S8PD | 24S | 80A | 0.6A | 71.59 |
JK-BD6A24S10P | 24S | 100A | 0.6A | 76.23 |
JK-BD6A24S10PD | 24S | 100A | 0.6A | 73.33 |
JK-BD6A24S12P | 24S | 120A | 0.6A | 76.96 |
JK-BD6A24S12PD | 24S | 120A | 0.6A | 74.06 |
JK-BD6A24S15P | 24S | 150A | 0.6A | 79.86 |
| JK-BD6A24S15PDthis listing | 24S | 150A | 0.6A | 76.23 |
JK-BD6A24S20P | 24S | 200A | 0.6A | 130.57 |
JK-BD6A24S30P | 24S | 300A | 0.6A | 174.98 |
JK-BD6A32S10P | 32S | 100A | 0.6A | 165.98 |
JK-BD6A32S15P | 32S | 150A | 0.6A | 175.68 |
The closest step below this board inside BD6A is JK-BD6A24S12P: same 24S ceiling, same 0.6A balancer, only the continuous rating moves, to 120A. US$0.73 separates the two at the base configuration. Size that gap against the load actually drawn, because nothing else about the two boards changes.
JK-BD6A20S15P holds the same 150A continuous rating and changes only the string ceiling: 76.8V nominal here against 64V there. Cell count is fixed by the pack being built, so it is the constraint that comes first.
JK-B1A24S15P is the other candidate for the same pack: 24S, 150A, 1A balancing rather than 0.6A. It sits US$10.75 above this listing at the base configuration. If the cells are matched and the duty cycle leaves idle time, the cheaper of the two is the right answer; if they are not, no protection setting replaces balance current.
26 BD6A codes are priced here, from US$47.98 for JK-BD6A17S6P to US$175.68 for JK-BD6A32S15P; JK-BD6A24S15PD is 16 of that set at US$76.23 before configuration options. The spread across the family is a ratings spread rather than a margin spread, so quote the cheapest code that clears the calculation.
Model planning
The figures below are the ones that decide whether JKBMS JK-BD6A24S15PD Smart Active Balance BMS works in a given pack. Read them against the cells and the load before ordering.
System fit checks
Four things worth settling while the order is still changeable, and one worth doing in the right order once the hardware arrives.
Confirm the battery pack is within 8-24S. Match the 150A continuous discharge rating to the inverter, load, wiring, and thermal design. Use the 0.6A active-balancing class as one selection input, not as a substitute for good cell matching.
The listed communication options are Bluetooth, Display. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Bring the pack up on local monitoring and confirm the cell readings look sane before connecting anything downstream. Debugging a protocol handshake against a pack that has an unrelated wiring or balance fault costs most of a commissioning day.
Buying notes
Practical points buyers raise before paying: where the product comes from, what documentation to check first, how it ships, and how the price is set.
This catalogue is operated by JKBMS Electronic Technology Co.,Ltd rather than a reseller, so model configuration, documentation, and warranty questions are answered by the manufacturer instead of being referred upstream.
Parameter sets and connector assignments differ between model families and hardware revisions. Download the manual for this exact model and check it against your pack before commissioning rather than relying on a similar model.
JKBMS boards, monitors, displays, and accessories ship free worldwide. Delivery time depends on destination and customs handling rather than on the order value.
Each configuration is priced separately and the total is re-checked on the server at checkout, so the price shown for the selected SKU is the price charged. Larger quantities are quoted separately through a bulk enquiry.
Product FAQ
JKBMS JK-BD6A24S15PD Smart Active Balance BMS is a JK BD-series smart active-balance BMS listed from $76.23 to $111.21. It is suited to 8-24S lithium battery packs and should be selected by cell count, discharge current, balance current, and required communication interface.
Check continuous current (150A), balance rate (0.6A), the port set (Bluetooth, Display) against the pack you are building. The order that matters: series count has to match the cells, current has to cover the load with margin, and the port set has to leave a free port for whatever the system talks to.
Selected JKBMS smart BMS model or display bundle; Model-specific wiring harness and standard accessories supplied with the product; Documentation or setup references supplied with the selected package. Not included: Battery cells, battery enclosure, inverter, charger, and external power cabling; External contactors, breakers, fuses, and installation hardware unless specified. Where a configuration option changes the contents, the option selected at checkout is what ships.
JK-BD6A24S15PD is stocked here as a jkbms jk-bd series listing. JKBMS hardware is built by JKBMS Electronic Technology Co.,Ltd, and BatteryBoxKit is the storefront that holds and ships it, so orders leave from held stock and confirmations come from zhou@jkess.com.
This page lists 3 configurations, and the one selected at checkout is what ships. Order directly from this page; boards, displays, cables and accessories ship free. If the cart also includes a battery kit, that kit's destination-based shipping rule applies, so confirm the destination before paying.
Shipping and return terms apply to this listing and to every configuration shown above.
Ready to power your future? Contact us for a custom quote or partnership inquiry.
WhatsApp
WeChat