1 / 6Caster Battery Enclosure Kit
Movable LiFePO4 battery enclosure kit with optional BMS and LCD
A heavy-duty enclosure and assembly hardware kit for building a movable 51.2V LiFePO4 storage battery. It supports 280Ah to 320Ah cells and 15kWh or 16kWh assembled configurations after compatible cells are installed. Battery cells are not included.
Shipping is calculated by destination during checkout. PayPal verifies and captures the final amount securely.
Product details
Detailed product information
Review the full product illustrations, dimensions, component information, and application notes before selecting a configuration.
SELECTION HELP
Check cell dimensions, installation format, assembled capacity, BMS, LCD, communication, and shipping before ordering.
Read guideCOMMUNICATION GUIDESeparate physical interface choice from inverter protocol and system compatibility requirements.
Read guideFIT AND INSTALLATION NOTES
This is an enclosure kit, not a battery. Cells are not included unless the selected package says so, and neither is an inverter or on-site installation. Check the cell dimensions against the internal layout before ordering, because a cell format that is a few millimetres off will not seat.
Bought for a wheeled 51.2V LiFePO4 pack that has to be moved between locations. Within the JKESS battery and ESS hardware, that is the job this one is sized for.
Ratings for Battery Kit (With Caster) depend on the selected configuration, so take them from the spec table on this page rather than from the model name.
Communication on this unit is CAN 2.0 / RS485 with compatible BMS option. That establishes what it can speak, not whether a given inverter will answer; the protocol profile, pinout and both firmware versions still decide that.
Family position
| Model | From, US$ |
|---|---|
| Battery Kit (With Caster)this listing | 300.00 |
6U Battery Kit | 280.00 |
High Voltage Kit | 390.00 |
There is no ratings comparison to make here. 3 Battery Kits listings are stocked, and which one fits is decided by connector, protocol and physical mount rather than by current or capacity, so compare against the unit this attaches to rather than against the nearest price.
Prices across this group run from US$280.00 (6U Battery Kit) to US$390.00 (High Voltage Kit), with this listing from US$300.00. Where two entries sit far apart, the gap is the interface or the bundled hardware rather than the quality of the part, so buy to the requirement in front of you.
Model planning
The figures below are the ones that decide whether Battery Kit (With Caster) works in a given pack. Read them against the cells and the load before ordering.
System fit checks
Four things worth settling while the order is still changeable, and one worth doing in the right order once the hardware arrives.
Confirm cell chemistry and dimensions before selecting the enclosure. Battery cells, inverter equipment, onsite installation, and external system wiring are not included unless they are named in the selected package. Review the selected enclosure, LCD, and BMS option before checkout.
The listed communication options are CAN 2.0 / RS485 with compatible BMS option. Confirm protocol, pinout, baud rate or CAN bitrate, firmware, and inverter compatibility before installation.
Reserve space for the listed dimensions: 835 × 400 × 280 mm. Review enclosure or protection details: Sheet-metal, IP54-rated design. Use suitable fusing, cable size, torque, ventilation, insulation, and commissioning checks for the final battery system.
Top-balance the cells before the first full cycle. A pack assembled at mixed states of charge will read as unbalanced under load no matter how the BMS is set, and the balancer will spend days correcting what an hour of preparation avoids.
Buying notes
Practical points buyers raise before paying: where the product comes from, what documentation to check first, how it ships, and how the price is set.
This catalogue is operated by JKBMS Electronic Technology Co.,Ltd rather than a reseller, so model configuration, documentation, and warranty questions are answered by the manufacturer instead of being referred upstream.
Battery enclosure kits ship free to the EU. Shipments to the US, Southeast Asia, Japan, Korea, and selected Middle East destinations carry a flat freight charge, and other destinations are quoted manually because of size and weight.
A kit supplies the enclosure and assembly hardware. Cells, BMS, and any display are selected separately, so confirm cell dimensions and series count against the kit before ordering.
Each configuration is priced separately and the total is re-checked on the server at checkout, so the price shown for the selected SKU is the price charged. Larger quantities are quoted separately through a bulk enquiry.
Product FAQ
A heavy-duty enclosure and assembly hardware kit for building a movable 51.2V LiFePO4 storage battery. It supports 280Ah to 320Ah cells and 15kWh or 16kWh assembled configurations after compatible cells are installed. Battery cells are not included.
Check the port set (CAN 2.0 / RS485 with compatible BMS option) against the pack you are building. The order that matters: series count has to match the cells, current has to cover the load with margin, and the port set has to leave a free port for whatever the system talks to.
Heavy-duty sheet-metal enclosure with caster base; Internal mechanical and connection hardware supplied with the selected package; LCD display and BMS only when the Enclosure + LCD + BMS option is selected. Not included: LiFePO4 battery cells; Inverter, charger, external breaker, and external cabling. Where a configuration option changes the contents, the option selected at checkout is what ships.
Battery Kit (With Caster) is stocked here as a battery kits listing. JKBMS and JKESS hardware is built by JKBMS Electronic Technology Co.,Ltd, and BatteryBoxKit is the storefront that holds and ships it, so orders leave from held stock and confirmations come from zhou@jkess.com.
This page lists 2 configurations, and the one selected at checkout is what ships. Confirm the destination at checkout, since kit shipping is charged by region. Cells, inverter equipment and on-site work are separate unless the selected package lists them.
Shipping and return terms apply to this listing and to every configuration shown above.
Ready to power your future? Contact us for a custom quote or partnership inquiry.
WhatsApp
WeChat